FLASH DI-466

-For Canon SLR cameras-

Nissin Di-466 Flash is compatible with Canon SLR camera models that utilize the ETTL I/II flash control system.

A firmware upgrade service is available for the Di466, which provides a service terminal to upload the latest software.

POINT & SHOOT:
Clip it, point and shoot. This cutting-edge photographic technology for AF and TTL auto exposure systems never fails to deliver the desired result. A beautiful picture is automatically obtained.
Di466 enables more convenient operation and superior outcomes.

EVERY OPPORTUNITY:
The flash produces the same color as sunlight. It also proves very helpful for daylight photography. Eliminate the shade under trees.
Use fill-in lighting to sharpen the subject. Address catchlight in the eyes, and stop motion. Emphasize the lighting contrast.

FIRMWARE UPDATE:
Tired of your flash no longer whenever a new camera comes onto the market?
A firmware upgrade service is available for the Di466, which provides a service terminal to upload the latest software.
A charge for the firmware update service will apply, varying depending on the area. Please check at your local dealer for details about the update service.
KEY FEATURES:

TTL FLASH:

Di-466 responds to Canon's E-TTL, E-TTLII system. Those new digital TTL flash systems control the flash light with greater precision and stability.

NISSIN ORIGINAL “MY TTL” SETTING:
The TTL flash power level is pre-set for reasonable exposure at factory. You can, however, reset the power at the desired exposure level, in +-3/4Ev. by 1/4Ev increments.
The preset value is memorized as your personal standard after switching the unit off.
This unique system for customizing your level settings, called MY TTL, is a feature exclusive to Nissin.
The usual TTL flash level compensation works based on this customized level.

TTL FLASH LEVEL COMPENSATION:
The power of the flash can be controlled with TTL flash level compensation. Whereas total exposure is controlled by the camera's EV compensation function, the flash can compensate for the exposure on the main subject only, with little impact on the exposure of the background scene. The flash power level can be adjusted from  -1.5 EV through +1.5 EV by 0.5 EV steps.

BATTERY MAGAZINE: Quick Loading System
Battery2 sec. loading by Nissin original battery magazine.
A convenient battery magazine has the slots for all four batteries in the same direction, with an anti-reverse loading guide so that the batteries can be correctly inserted every time, even in poor lighting. An extra battery magazine is separately available.

SILENT OSCILLATION:
The oscillation circuit produces frequencies that are inaudible to humans.
The sharp humming of the oscillator can cause irritation, which may be quite severe in certain settings.

DUAL PROGRAM WIRELESS REMOTE FLASH:
RemoteThe wireless remote flash system of Di466 works for either analogue (single flash) and digital (pre-flash) flash systems. Variable power in six steps is available.
Place the Di466 off the camera and the flash synchronizes with the master flash placed on your camera. This wireless remote flash system is called slave flash technology and is often used for a creative lighting efficiency.
Use the camera's built-in flash, the manufacturer's original flash, or Di466 as the master flash. Place one or more Di466 flash units away from the camera.
Off-camera flash photography offers a different lighting configuration.
Use multiple Di466 flash units to achieve professional flash techniques.

POWER ZOOM & TURNING FLASH HEAD:
FilterWidepanelLight distribution angle is automatically adjusted for the lens focal length. A high quality stepping motor sharply traces the lens movement with the same speed as that of the camera manufacturer's original flash.
The flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to70mm of the digital lens. For a longer lens, the flash head reflector position stays at 70mm.
It turns 90 degree upward for bounce lighting.
The flash head also stores a small reflection panel for a fill-in shot.

ENERGY SAVING:
The Di466 has a dual energy saving system.
It automatically enters sleep mode when it's not in use for 5 min., and is reset with a touch of the shutter button or any button of the flash.
If the unit is not in use for 30 minutes, it will automatically power off.
With the flash unit set for slave mode, sleep mode is cancelled and the automatic turn off timing is prolonged to 60 minutes.

VARIABLE POWER:
When selecting manual power operation, choose from one of the six variable powers for the best lighting effect.
The power level is provided from full power down to 1/32nd power in 1.0Ev incr

AF ASSIST BEAM:
In darkness or dim light conditions, the Di466 beams an orange LED light to create a sharp contrast to enable the camera's focus sensor to focus easily on the subject.

COLOR FILTER GUIDE:
The Di466 has a guide rail for filters. Color filters and density filters can slide into the slot provided at the front of flash window.

FLASH POWER LOCK SYSTEM:
The Di466 is compatible with the FE lock (Canon).
Refer to the camera owner's manual for details.

REAR CURTAIN SYSTEM:
Some Canon cameras set the flash for rear curtain synch. photography.