FLASH DI-622

-For Nikon SLR cameras-

Nissin Di-622 Flash is compatible withV Nikon SLR camera models that use the iTTL flash control system.

A firmware upgrade service is available for the Di622, which provides a service terminal to upload the latest software.

CLIP & SHOOT:

1. Clip it on the camera
2. Switch it on
3. Release the shutter button.            

The flash fires and its light is automatically controlled by the camera and the flash TTL dedicated system.

EVERY OPPORTUNITY:

Many photographers think of using a flash only at night or in poor lighting. However, a flash can be very useful in daylight too. Eliminate the shade under trees. Use fill-in lighting to sharpen the subject. Address catch-light in the eyes, and stop motion. Emphasize the lighting contrast. Enjoy more opportunities to use your flash.

FIRMWARE UPDATE:

Tired of your flash no longer working whenever a new camera comes onto the market? A firmware upgrade service is available for the Di622, which provides a service terminal to upload the latest software. A charge for the firmware update service will apply, varying depending on the area.

KEY FEATURES

TTL FLASH:

Di622 is compatible with Nikon's i-TTL system. Those new digital TTL flash systems control the flash light with greater precision and stability.

POWER ZOOM & TURNING FLASH HEAD:

The light distribution angle is automatically adjusted for the lens focal length.

BOUNCE FLASH:

The flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to 70mm of the digital lens. For a longer lens, the flash head reflector position stays at 70mm.

It turns 90º upward and 270ºhorizontally for bounce lighting. The flash head also stores a small reflection panel for fill-in shots.

OFF CAMERA FLASH:

The Di622 has a special photo sensor built-in. Place the Di622 off camera and the flash will synchronize with the master flash placed on your camera. This wireless remote flash system is called slave flash technology and is often used for a creative lighting efficiency. Use the camera's built in flash, the camera manufacture's original flash or the Di622as the master flash. Place one or more Di622 flash units away from the camera. The sensor circuitry of Di622 is compatible only with the latest pre-flash TTL system offered by Nikon. The Di622 is not compatible with traditional flash systems or studio flash systems.

ENERGY SAVING SYSTEM:

The Di622 has a dual energy saving system. It automatically enters sleep mode when it's not in use for 5 min, and is reset with a touch of the shutter button or any button of the flash. If the unit is not in use for 30 minutes, it will automatically power off. With the flash unit set for slave mode, sleep mode is cancelled and the unit will not automatically turn off until 60 minutes have elapsed.

HIGH POWER:

Guide Numbers: 62 (ISO 200) is obtained at the reflector position for 105mm focal length lens,and 45 at 35mm. The guide number of the flash built in the camera is 16 at ISO200.

VARIABLE POWER:

When selecting manual power operation, choose from one of the six variable powers for the best lighting effect. The power level is provided from full power down to 1/32 second power in 1.0 Ev increments.

AF ASSIST BEAM:

In darkness or dim light conditions, the Di622 beams a red light to create a sharp contrast to enable the camera's focus sensor to focus easily on the subject.

FLASH POWER LOCK SYSTEM:

The Di622 is compatible with  FV lock (Nikon) system. Refer to the camera owner's manual for details.

RED EYE REDUCTION:

A small flash beam is automatically produced for short distance portrait shots to prevent the re eye phenomenon.